Bimba STP-10 Manuel d'utilisateur télécharger pdf (Page 11)

STP-10 Hardware Manual

Option 2: Connect a Drive Directly to Your PC

This is the simplest option:

1. Connect one end of a CAT5 Ethernet cable into the LAN card (NIC) on your PC and the other into the drive. You don’t need

a special “crossover cable”; the drive will automatically detect the direct connection and make the necessary physical layer

changes.

2. Set the IP address on the drive to “10.10.10.10” by setting the rotary switch at “0”.

3. To set the IP address of your PC:

a. On Windows XP, right click on “My Network Places” and select properties.

b. On Windows 7, click Computer. Scroll down the left pane until you see “Network”. Right click and select properties.

Select “Change adapter settings”

4. You should see an icon for your network interface card (NIC). Right click and select properties.

a. Scroll down until you see “Internet Properties (TCP/IP)”. Select this item and click the Properties button.

b. On Windows 7 and Vista, look for “(TCP/IPv4)”

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 38 39

Pas de commentaire

Bimba STP-10 Manuel d'utilisateur Page 11