Bimba IntelliSens Manuel d'utilisateur télécharger pdf (Page 16)

IntelliSense

Manual

Data Gateway Network Settings

The Data Gateway is a TCP/IP v4 device and following network settings can be made to enable communication:

Global Server Settings

Figure 37: Global network settings

Web Port: This denes the TCP port for connecting to IntelliSense

. Unless needed, keep the

default value.

Base URL: For reference, gives the full URL including port number, to access the current server.

Save: All changes must be saved to become effective.

Wired Ethernet

The following settings are for the wired RJ-45 Ethernet port on the Data Gateway. Press the save button to make the

changes effective.

DHCP: Congures the Gatway to receive TCP/IP settings from a DHCP server.

Static: Allows the user to manually enter the TCP/IP address, subnet mask, gateway and DNS

servers.

The data gateway has a default parameters of:

IP address: 10.10.10.20

Subnet Mask: 255.255.255.0

IP Settings: When in DHCP mode, displays the assigned parameters. In static mode, values can be

entered here.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Pas de commentaire

Bimba IntelliSens Manuel d'utilisateur Page 16